Metro L3-061 1.0L VIN 6 TBI (1998)
11. Remove the six Hydraulic Valve Lash (HVL) Adjusters from the cylinder head.
^
Use a J 26900-2 In order to inspect for camshaft wear by measuring the camshaft lobe height (2).
-
Standard camshaft lobe height is 40.415 to 40.575 mm (1.5911 to 1.5974 inch).
-
Minimum camshaft lobe height is 40.315 mm (1.5872 inch).
^
Replace the camshaft (1) if the camshaft lobe height is less than the minimum limit.
INSTALLATION PROCEDURE
1. Pour engine oil through the camshaft journal holes (2).
2. Inspect that the engine oil comes out from the oil holes in the HVL adjuster bores.
