Metro L3-061 1.0L VIN 6 TBI (1998)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
REMOVAL PROCEDURE
1. Remove the oil level indicator from the guide tube.
2. Remove the one retaining bolt and guide tube (1) from the cylinder block.
3. Remove the guide tube seal (3) from the cylinder block.
INSTALLATION PROCEDURE
1. Install the new guide tube seal (3) to the cylinder block.
2. Install the guide tube (1) to the cylinder block.
3. Secure the guide tube with one bolt.
^
Tighten the guide tube bolt to 11 Nm (97 ft. lbs.).
4. Install the oil level indicator to the guide tube.
5. Start the engine and check for engine oil leaks around the guide tube.
