Metro L3-061 1.0L VIN 6 TBI (1998)
Compressor Clutch Coil: Service and Repair
Removal Procedure
Tools Required
^
J 39200 Digital Multimeter
^
J 41384 Clutch Plate Holder/Remover
1. Remove the compressor from the vehicle.
2. Remove the pressure plate nut and the washer from the drive shaft using the J 413B4.
3. Remove the pressure plate from the drive shaft using the J 41384.
4. Remove the clutch pulley snap ring (1) and the shim. Use the appropriate snap ring pliers.
Important: Do not damage the clutch pulley during removal.
5. Remove the clutch pulley from the compressor by tapping with a plastic hammer.