Metro L3-061 1.0L VIN 6 TBI (1998)
Heater Core Case: Service and Repair
Removal Procedure
1. Remove the instrument panel (IP).
2. Drain the engine cooling system.
3. Remove the clamps and the heater hoses from the heater core at the bulkhead.
4. Remove the blower case-to-heater case air duct at the heater case.
5. Remove the following components from the vehicle:
^
The 2 bolts (1)
^
The 2 nuts (2)
^
The heater case
6. Remove the heater case retaining clips and the 2 screws (1) from the heater case.