Metro L3-061 1.0L VIN 6 TBI (1998)
Speedometer Head: Service and Repair
REMOVAL PROCEDURE
NOTE: When replacing a speedometer or odometer assembly, federal law requires that the odometer reading of the replacement unit be set to register
the same mileage as the prior odometer. If the same mileage cannot be set, the law requires that the replacement odometer be set at zero and a label be
installed on the driver's door frame to show the previous reading and the date of replacement.
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Remove the instrument cluster from the instrument panel.
3. Push on the tabs in order to remove the cluster lens (7) and the bezel assembly (6) from the cluster housing.
4. Remove 4 screws (2) that secure the speedometer to the cluster housing.
5. Remove the speedometer gauge (5) from the cluster housing (3).
