Metro L3-061 1.0L VIN 6 TBI (1998)
Fuel Tank Pressure Sensor: Service and Repair
EVAP Tank Pressure Control Solenoid Valve Replace
EVAP Tank Pressure Control Solenoid Valve Replace
Removal Procedure
1. Remove the air cleaner. Refer to Air Cleaner
^
Assembly Replacement.
2. Disconnect the two vacuum hoses from the EVAP tank pressure control solenoid valve.
3. Disconnect the EVAP tank pressure control solenoid valve electrical connector.
4. Remove the one screw and the EVAP tank pressure control solenoid valve from the engine compartment bulkhead.
Installation Procedure