Metro L3-061 1.0L VIN 6 TBI (1998)
volts.
Notice: Refer to Fastener Notice in Cautions and Notices.
8. Tighten the TP sensor screws (1).
Tighten
Tighten the TP sensor screws to 2.0 N.m (18 lb in).
9. If a TP sensor voltage reading of 0.98 to 1.02 volts cannot be obtained, replace the TP sensor. Refer to TP Sensor Replacement.
10. Install the air cleaner. Refer to Air Cleaner Assembly Replacement.
