Metro L3-061 1.0L VIN 6 TBI (1998)
1. Install the ISC motor to the TBI unit with the three screws (1).
Tighten
Tighten the ISC motor screws to 2.8 to 4.0 N.m (24 to 36 lb in).
2. Connect the ISC motor electrical connector (2).
3. Install the air cleaner. Refer to Air Cleaner Assembly Replacement.
4. Start the engine.
5. Run the engine to normal operating temperature and check that the idle speed is within the specified idle range. Refer to Idle Speed Inspection.