Metro L3-061 1.0L VIN 6 TBI (1998)
Air Bag Control Module: Service and Repair
Removal Procedure
Description
1. Disable the SIR system. Refer to Disabling the SIR System.
2. Remove the center console in order to access the SDM (1).
Refer to Instrument Panel, Gauges and Console.
3. Remove the Connector Position Assurance (CPA) from the SDM harness connector.
4. Disconnect the SDM harness connector (2) from the SDM (1).
5. Remove the SDM fasteners (3).
6. Remove the SDM (1) from the vehicle.
