Metro L3-061 1.0L VIN 6 TBI (1998)
6. Upper and lower steering column covers by removing five screws from the lower cover.
7. SIR coil and combination switch electrical connectors.
8. Loosen SIR coil and combination switch electrical harness wire bands.
9. SIR coil and combination switch from column by removing three screws.
INSTALL OR CONNECT
1. SIR coil and combination switch to column; secure with three screws.
2. SIR coil and combination switch electrical connectors and secure harness to column with wire bands.
3. Upper and lower column covers; secure with five screws
4. Tighten:
^
Two upper steering column mounting TORX(R) headed bolts.
^
Upper steering column Mounting bolts to 14 Nm (10 ft. lbs.)
5. Knee bolster.
6. Lower steering column trim cover; secure with three screws.
7. Steering wheel to steering column.
