Metro L3-061 1.0L VIN 6 TBI (1998)
7. Refer to BRAKE CALIPER REPLACEMENT in order to install the following:
^
The brake rotor
^
The caliper carrier
^
The caliper
8. Secure the items with the drive axle nut.
Tighten
Tighten the drive axle nut to 175 Nm (129 ft. lbs.).
9. Install the stake drive axle nut using a hammer and punch.
10. Install the wheel speed electrical connector to sensor, for ABS equipped vehicles.
11. Install the wheel speed sensor to knuckle. Secure with one bolt, for ABS equipped vehicles.
Tighten
Tighten the wheel speed sensor retaining bolt to 10 Nm (7 ft. lbs.).
12. Install the tire and wheel assembly. Refer to WHEEL REMOVAL.
13. Lower the vehicle.
