Metro L3-061 1.0L VIN 6 TBI (1998)
Steering Gear: Service and Repair
Unit Repair
Manual Steering Gear
REMOVE OR DISCONNECT
^
Tools Required:
-
J 41378 Pinion Bearing Plug Socket
-
J 34839 Pinion Bearing Remover
-
J 23907 Slide Hammer
-
J 34869 Rack Bushing Remover
1. Manual steering gear assembly from vehicle.
2. Loosen tie rod end locknut and remove tie rod ends from tie rods.
Marking Locknut Position
Important: For ease of adjustment after installation, mark the position of the tie rod end locknut on the tie rod thread.
Steering Rack Boot
3. Boots from tie rods by removing retaining clamps.
