Metro L3-061 1.0L VIN 6 TBI (1998)
6. Install the outer bearing race (1) onto the wheel hub (2). Use the J 36050. Use a press.
7. Apply the wheel bearing grease to the lip of the inner oil seal.
8. Align the hole in the seal with the hole in the steering knuckle for the wheel speed sensor, for ABS equipped vehicles.
9. Install the inner oil seal (1) to the inboard side of the knuckle. Use the J 41392 and J 7079-2.
10. Install the outer oil seal (1) to the outboard side of the steering knuckle. Use the J 39722 and J 7079-2.
11. Install the steering knuckle to the vehicle. Refer to STEERING KNUCKLE REPLACEMENT.
Wheel Bearing and Wheel Hub Replacement (Wheel Hub Repl)
FRONT WHEEL BEARINGS AND/OR HUB
