Metro L3-061 1.0L VIN 6 TBI (1998)
4. Remove the inner boot band (2) from the outer boot (3).
5. Remove one snap ring (2) and the outer joint housing (3) from the outer joint and wheel drive shaft.
6. Remove the roller ball guide snap ring (2) from the wheel drive shaft.
7. Place an index mark (reference mark) on the roller ball guide (1) and the wheel drive shaft to ensure correct assembly.
8. Remove the roller ball guide, the six roller balls and the roller cage (2) from the wheel drive shaft (1).
9. Remove the outer boot from the wheel drive shaft.
10. Clean the outer boot with a clean, dry, solvent-free cloth.
NOTICE: DO NOT wash drive axle boots in solvent. Washing drive axle boots in degreaser or other solvents causes deterioration of boots clean
drive axle boots with a clean, dry, solvent-free cloth.
