Metro L3-061 1.0L VIN 6 TBI (1998)
9. Remove the following from the left case:
^
The 3 bolts (1)
^
The left case cover (2)
^
The O-ring
10. Remove the gearshift yoke bolt (2) from the gearshift yoke (3).
11. Remove the drain pan from under the transaxle.
12. Lower the vehicle.
13. Remove the gearshift interlock bolt (2) and washer from the left case.
14. Remove the gearshift and select shaft assembly (1).
15. Use a standard drift punch and a hammer in order to remove the reverse interlock shaft roll pin from the gearshift and the select shaft (1).
16. Remove the fifth and reverse gearshift cam (2) from the gearshift and the select shaft.
