Metro L3-061 1.0L VIN 6 TBI (1998)
17. Remove the fifth and reverse cam guide return spring from the gearshift and the select shaft.
18. Use a standard drift punch and a hammer to remove the gearshift cam guide roll pin from the gearshift and the select shaft.
19. Remove the fifth and reverse gearshift cam guide from the gearshift and the select shaft.
20. Remove the following components from the gearshift and the select shaft:
^
The select spring guide
^
The reverse select spring
21. Remove one washer and one C-clip from the gearshift and the select shaft.