Metro L4-079 1.3L VIN 2 MFI (2001)
Air Door Cable: Service and Repair
Heating, Ventilation and Air Conditioning
Mode Control Cable Replacement
Mode Control Cable Replacement
REMOVAL PROCEDURE
IMPORTANT: Note the routing position of the cable in order to ensure easy installation.
1. Disconnect the mode control cable (2) at the heater case (1).
2. Remove the heater control unit (5).
3. Disconnect the mode control cable at the heater control unit.
4. Remove the mode control cable from the Instrument Panel (IP).
INSTALLATION PROCEDURE
1. Position the mode control cable in the vehicle. Correctly route the cable.
2. Connect the mode control cable (2) to the heater control unit (5).
3. Install the heater control unit to the IP.
4. Connect the mode control cable to the heater case (1).
5. Adjust the mode control cable. Refer to Mode Control Cable Adjustment.
Vent Control Cables Replacement
Vent Control Cables Replacement
REMOVAL PROCEDURE
IMPORTANT: Note the routing position of the cable in order ensure easy installation.
