Metro L4-079 1.3L VIN 2 MFI (2001)
1. Use your hands in order to lift the front bumper of the vehicle up approximately 38 mm (1.5 inch). Gently remove your hands in order to allow the
vehicle to lower.
2. Use your hands in order to push the front bumper of the vehicle down approximately 38 mm (1.5 inch). Remove your hands in order to allow the
vehicle to rise.
3. Measure the dimension (1) for the left and right side of the vehicle. The dimension (1) is the vertical distance measured between the centerline of
the lower control arm rear bolt and the bottom of the ball joint. Refer to Trim Height Specifications (Lower Control Arm).
4. Replace the front springs to correct the front trim height as necessary. Refer to Strut, Strut Component and/or Spring Replacement.
