Metro L4-079 1.3L VIN 2 MFI (2001)
8. Use the following tools in order to remove the lip seal from the inside of the speedometer driven gear case (1):
8.1.
J34839
8.2.
J37764
8.3.
J23907
9. Inspect the speedometer driven gear for excessive damage.
10. Inspect the O-ring damage.
Installation Procedure
^
Tools Required
-
J34857 Gearshift Shaft Seal Installer
-
J36850 Transmission Assembly Lubricant
1. Apply some J36850 to the new lip seal.
2. Use the J34857 in order to install the new lip seal (2) into the speedometer driven gear case (1).
