Monte Carlo V6-204 3.4L DOHC VIN X SFI (1996)
Heater Hoses
Remove or Disconnect
1. Air cleaner and duct assembly.
2. Drain cooling system.
3. Cruise control module and reposition.
4. Throttle position sensor electrical connector.
5. Heater inlet/outlet hose at pipe assembly.
6. Heater inlet/outlet hose at engine.
7. Heater inlet/outlet hose.
Install or Connect
1. Heater inlet/outlet hose.
2. Heater inlet/outlet hose at engine.
3. Heater inlet/outlet hose at pipe assembly.
4. Throttle position sensor electrical connector.
5. Cruise control module and reposition.
6. Refill coolant.
7. Air cleaner and duct assembly.
Tighten
^
Bolts to 5 N.m (44 lb. in.).