Monte Carlo V6-204 3.4L DOHC VIN X SFI (1996)
Air Injection Filter: Service and Repair
AIR Pump Filter Service
REMOVAL PROCEDURE
1. Raise the vehicle.
2. Removal the right inner fender access cover.
3. Remove the hoses/clamps from the filter.
4. Remove the filter retaining bolt.
5. Remove the filter from the air injection pump.
INSTALLATION PROCEDURE
1. Install the filter to the air injection pump.
2. Install the filter retaining bolt.
Tighten
Bolt to 8 Nm (70 lb in).
3. Install the hoses/clamps to the filter.
4. Install the right inner fender access cover.
5. Lower the vehicle.
