Monte Carlo V6-204 3.4L DOHC VIN X SFI (1996)
18. Remove the nuts at the upper intake manifold support bracket.
19. Remove the upper intake manifold.
20. Remove the coolant recovery reservoir.
21. Remove the drive belt.
22. Remove the drive belt tensioner.
23. Remove the power steering pump.
24. Disconnect the PCM electrical connectors.
25. Disconnect the spark plug wires from the spark plugs.
26. Remove the wiring harness cover at the right strut tower.
27. Remove the fuel line bracket.
28. Remove the left timing belt cover.
29. Remove the right timing belt cover.
30. Disconnect the breather hose from the rear camshaft cover.
31. Disconnect the crankshaft vent from the breather manifold.
32. Remove the camshaft carrier covers.
