Monte Carlo V6-204 3.4L DOHC VIN X SFI (1996)
Ignition Control Module: Service and Repair
Ignition Coil Assembly
REMOVE OR DISCONNECT
1. Negative battery cable,
2. 6-way connector, 3-way connector and 2-way connector at ignition control module.
3. Spark plug wires from ignition coils.
4. 6 screws securing ignition coils to ignition control module.
5. Disconnect coils from ignition control module.
6. Bolts securing Ignition control module to bracket
7. Ignition control Module.
INSTALL OR CONNECT
1. Ignition coils to ignition control module.
2. 6 screws, torque to 4-5 Nm (40 lb in.).
3. Ignition Control Module to Bracket.
4. Bolts, torque to 8 Nm (70 lb in.).
5. Plug wires.
6. 6-way connector, 3-way connector and 2-way connector to module.
7. Negative battery cable.
