Monte Carlo V6-204 3.4L DOHC VIN X SFI (1996)
Alignment: Service and Repair
Preliminary Inspection
1. Ensure tires are inflated to correct pressure, and check for uneven wear.
2. Check front wheel bearings and related suspension components for damage and replace as necessary, to eliminate improper alignment due to faulty
components.
3. Check ball joints and tie rods.
4. Check vehicle trim heights.
5. Check steering gear for looseness at frame.
6. Check struts for improper operation.
7. Check for loose control arms.
8. Check for loose or missing stabilizer shaft attachments.
