chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Other Service Bulletins for Relay Module: > < Electrical - MIL ON/DTC's Set By Various Control Modules|Page 22
Page 1
background image

Drive Pulley: All Technical Service Bulletins
Accessory Drive Belt - Breaks/Comes Off Pulley

Number:

84-92

Section:

6A (VI)

Date:

Mar., 1984

Subject:

ACCESSORY DRIVE BELTS BREAKING OR COMING OFF ON 3.8L (LC3) V6 AND 5.0L (LG4, L69) V8 ENGINES

Model and Year:

1983-84 IMPALA, CAPRICE, MONTE CARLO, EL CAMINO AND 1983 MALIBU

TO:

ALL CHEVROLET DEALERS

The breaking or coming off of accessory drive belts on some subject vehicles may be due to a mismatching of the water pump and crankshaft pulley
diameters. This can cause one (1) of the belts to drag in it's groove as the mismatched system tries to drive the belt at two
(2)

different speeds.

Water Pump/Crankshaft Pulley

If the above condition is encountered, verify that the correct pulleys have been installed by referring to the illustration.

All Other Service Bulletins for Relay Module: > < Electrical - MIL ON/DTC's Set By Various Control Modules|Page 22