Monte Carlo V6-3.4L VIN E (2000)
Keyless Entry Receiver: Service and Repair
Remote Control Door Lock Receiver Replacement
REMOVAL PROCEDURE
1. Remove the defroster grille.
2. Disengage the remote control door lock receiver retainers.
3. Disconnect the remote control door lock receiver electrical connectors.
4. Remove the remote control door lock receiver.
INSTALLATION PROCEDURE
1. Position the remote control door lock receiver to the upper instrument panel. Connect the remote control door lock receiver electrical connectors.
2. Engage the remote control door lock receiver retainers.
3. Install the defroster grille.
4. If a new remote control door lock receiver is being installed, synchronize the transmitter. Refer to Transmitter Synchronization.
5. If a new remote control door lock receiver is being installed, program the transmitter. See: Testing and Inspection/Programming and Relearning