Monte Carlo V6-3.4L VIN E (2000)
Front Bumper Shock Absorber: Service and Repair
Front Bumper Fascia Energy Absorber Replacement (Monte Carlo)
Tools Required
J 38778 Door Trim Pad Clip Remover
Removal Procedure
1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Impala) (See: Front Bumper Cover / Fascia/Service and
Repair/Front Bumper Fascia Replacement)Front Bumper Fascia Replacement (Monte Carlo) (See: Front Bumper Cover / Fascia/Service and
Repair/Front Bumper Fascia Replacement).
2. Use J 38778 to remove the push-in retainers from the front bumper energy absorber.
3. Remove the front bumper energy absorber from the front bumper impact bar.
Installation Procedure
1. Install the front bumper energy absorber to the front bumper impact bar.