Monte Carlo V6-3.4L VIN E (2000)
Rear Bumper Cover / Fascia: Service and Repair
Rear Bumper Fascia Outer Support Replacement
Rear Bumper Fascia Outer Support Replacement (Monte Carlo)
Tools Required
J 38778 Door Trim Pad Clip Removal
Removal Procedure
1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Impala) (See: )Rear Bumper Fascia Replacement (Monte Carlo) (
See: ).
2. Remove the rear bumper fascia reinforcement outer push-in retainers using J 38778 .
3. Remove the rear bumper fascia reinforcement outer from the rear bumper fascia.
Installation Procedure
1. Install the rear bumper fascia reinforcement outer to the rear bumper fascia.
2. Install the rear bumper fascia reinforcement outer push-in retainers.
3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Impala) (See: )Rear Bumper Fascia Replacement (Monte Carlo) (See:
).