Monte Carlo V6-3.4L VIN E (2000)
Notice: Refer to Fastener Notice in Cautions and Notices.
8. Install the screw to the upper door trim panel.
Tighten the screw to the upper door trim panel to 2 Nm (18 lb in).
9. Install the screws to the front door pull handle.
Tighten the screws to the front door pull handle to 3.5 Nm (31 lb in).
10. Install the front door handle trim bezel. Refer to Door Inside Handle Bezel Replacement (Impala) (See: Door Inside Handle Bezel Replacement
)Door Inside Handle Bezel Replacement (Monte Carlo) (See: Door Inside Handle Bezel Replacement).
