Monte Carlo V6-3.4L VIN E (2000)
Cowl Moulding / Trim: Service and Repair
Air Inlet Grille Panel Replacement
Air Inlet Grille Panel Replacement
Tools Required
J 38778 Door Trim Pad Clip Remover
Removal Procedure
1. Open the hood.
2. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement in Wipers/Washer Systems.
3. Disconnect the windshield wiper washer hose from the air inlet grille.
4. Use the J 38778 to remove the push-in retainers from the air inlet grille.
5. Remove the air inlet grille from the vehicle.
Installation Procedure
1. Install the air inlet grille to the vehicle.
2. Install the push-in retainers to the air inlet grille.