chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Passenger Assist Handle > < Procedures|Page 11830
Page 2
background image

1. Move the headliner into the vehicle through the right front door, with an assistant.
2. Position the headliner to the roof by aligning the sunshade holes in the headliner with the respective hole in the roof structure.
3. Connect the headliner electrical harness connector and the ground wire.
4. Install the headliner wiring harness to the inner roof panel.
5. Connect the electrical connector to the rear view mirror.
6. Install the sunshades. Refer to Sunshade Replacement   (See: Sun Visor/Service and Repair/Sunshade Replacement).
7. Install the sunshade anchors. Refer to Sunshade Anchor Replacement   (See: Sun Visor/Service and Repair/Sunshade Anchor Replacement).
8. Install the two rear push-in retainers to the rear of the headliner.
9. Install the headliner (with sunroof) to the sunroof module by engaging the velcro strips.

10. Install the rear quarter upper trim panels. Refer to Quarter Upper Trim Panel Replacement (Impala)   (See: Trim Panel/Service and Repair/Quarter

Upper Trim Panel Replacement)Quarter Upper Trim Panel Replacement (Monte Carlo)   (See: Trim Panel/Service and Repair/Quarter Upper Trim
Panel Replacement).

11. Install the windshield pillar garnish molding. Refer to Windshield Pillar Garnish Molding Replacement (Monte Carlo)   (See: Trim Panel/Service

and Repair/Windshield Pillar Garnish Molding Replacement).

12. Install the side rail lamps. Refer to Roof Side Rail Lamp Replacement   .
13. Install the overhead console, if equipped. Refer to Roof Console Replacement   (See: Console/Service and Repair/Roof Console Replacement).
14. Install the dome lamp. Refer to Dome Lamp Replacement (Impala and Monte Carlo)   Dome Lamp Replacement (Impala with SEO, RPO 6C7)   .
15. Install the rear window trim panel. Refer to Rear Window Shelf Trim Panel Replacement (Monte Carlo)   (See: Trim Panel/Service and

Repair/Rear Window Shelf Trim Panel Replacement) in Interior Trim.

16. Install the rear seat back. Refer to Rear Seat Back Cushion Replacement (Non Folding)   (See: Seats/Seat Cushion/Service and Repair/Rear Seat

Back Cushion Replacement (Non Folding))Rear Seat Back Cushion Replacement (Folding)   (See: Seats/Seat Cushion/Service and Repair/Rear
Seat Back Cushion Replacement (Folding)) in Seats.

Passenger Assist Handle > < Procedures|Page 11830