Monte Carlo V6-3.4L VIN E (2000)
Power Mirror Switch: Service and Repair
REMOVAL PROCEDURE
IMPORTANT: Support the front door trim panel until the power mirror switch is removed.
1. Remove the front door trim panel.
2. Disconnect the front door power mirror switch by reaching around to the back of the front door panel and releasing the thumb tab retainers.
3. Remove the front door power mirror switch from the front door trim panel.
4. Disconnect the electrical connector from the power mirror switch.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the power mirror switch.
IMPORTANT: Support the front door trim panel until the power mirror switch and the door panel is installed.
2. Position the front door trim panel to the front door.
3. Install the front door power mirror switch to the front door panel pressing into place until fully seated and locked into position.
4. Install the front door trim panel.
