Monte Carlo V6-3.4L VIN E (2000)
Power Seat Switch: Service and Repair
Power Seat Switch Replacement
Removal Procedure
1. Remove the front seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement (See: Seat Cushion/Service and
Repair/Seat Cushion Outer Trim Panel Replacement).
2. Remove the power front seat switch from the front seat outer trim panel, using a small flat bladed tool.
3. Disconnect the electrical connector from the power front seat switch.
4. Remove the power front seat switch from the vehicle.
Installation Procedure
1. Connect the electrical connector to the power front seat switch.