Monte Carlo V6-3.4L VIN E (2000)
5. Fasten the J-hook retainers on all sides of the front seat cushion cover.
6. Fasten the hook and the loop retainers securing the seat cushion cover to the cushion, by pressing in place until fully seated.
7. Connect the electrical connector for the heated seat, if equipped.
8. Install the front seat outer trim bracket.
9. Install the front seat back. Refer to Front Seat Back Replacement (Bucket Seat) (See: Seat Back/Service and Repair/Front Seat Back
Replacement (Bucket Seat))Front Seat Back Replacement (Split Bench) (See: Seat Back/Service and Repair/Front Seat Back Replacement (Split
Bench)).
10. Install the front seat to the vehicle. Refer to Front Seat Replacement - Bucket (See: Service and Repair/Front Seat Replacement - Bucket).