chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Switch Replacement - Sunroof Position Encoding System|Page 12384 > < Switch Replacement - Sunroof Position Encoding System|Page 12382
Page 1
background image

Sunroof / Moonroof Switch: Service and Repair
Power Sunroof Switch Replacement (W/O Overhead Console)

REMOVAL PROCEDURE

1. Grasp the power sunroof switch on the left and right sides.

IMPORTANT:  The switch must be rotated, pulled down on the left side, to be removed.

2. Use 2, small, flat-bladed tools in order to disengage the clips which are located at the front and rear of the power sunroof switch. Hold the

flat-bladed tools parallel to the roof and push straight in.

3. Rotate the power sunroof switch toward the left side to disengage it from the mounting bracket and pull down.
4. Disconnect the electrical connector from the power sunroof switch.
5. Remove the power sunroof switch from the vehicle.

INSTALLATION PROCEDURE

1. Connect the electrical connector to the power sunroof switch.
2. Rotate the power sunroof switch back into the vehicle.
3. Firmly push the power sunroof switch into the headliner until fully seated.

Switch Replacement - Sunroof Position Encoding System|Page 12384 > < Switch Replacement - Sunroof Position Encoding System|Page 12382