Monte Carlo V6-3.4L VIN E (2000)
Spoiler: Service and Repair
Rear Spoiler Replacement (with RPO Y92)
Rear Spoiler Replacement (Monte Carlo with RPO Y92)
Removal Procedure
1. Remove the high mounted stop lamp from the rear compartment lid. Refer to High Mount Stop Lamp Replacement in Lighting Systems.
2. Open the rear compartment lid.
3. Remove the nuts from the studs on the rear end spoiler.
4. Remove the rear end spoiler from the rear compartment lid.
Installation Procedure
1. Using a small paint brush apply zinc-chromate primer to the spoiler stud inner and outer holes.