Monte Carlo V6-3.4L VIN E (2000)
Strut Tower Brace: Service and Repair
Cross Vehicle Brace Replacement
Removal Procedure
1. Open the hood.
2. Remove the nuts from the cross vehicle brace.
3. Remove the cross vehicle brace from the vehicle.
Important: Be careful, the stud plates may fall out and possibly get caught under the vehicle during the removal.
4. Remove the stud plates push on nuts from the studs.
5. Remove the stud plates from the vehicle.
Installation Procedure
Important: The stud plates will require an assistant to hold the stud plates during the installation of the push on nuts.
1. Install the stud plates to the vehicle.
2. Install the stud plates push on nuts to the studs.
