Monte Carlo V6-3.4L VIN E (2000)
Parking Brake Warning Switch: Service and Repair
Removal Procedure
1. Remove the left side instrument panel insulator. Refer to Insulator Replacement - IP (Left) in Instrument Panel, Gauges and Warning Indicators.
2. Remove the left carpet retainer and pull carpet back. Refer to Carpet Retainer Replacement (Impala) or Carpet Retainer Replacement (Monte
Carlo)
3. Disconnect the electrical connector from the switch.
4. Remove the mounting screw.
5. Remove the parking brake indicator switch (1).
Installation Procedure
1. Install the parking brake indicator switch (1).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the mounting screw.
^
Tighten the mounting screw to 3 Nm (26 inch lbs.).
3. Connect the electrical connector to the switch. Check the operation of the switch.
4. Install the left carpet retainer and carpet. Refer to Carpet Retainer Replacement (Impala) or Carpet Retainer Replacement (Monte Carlo).
5. Install the left side instrument panel insulator. Refer to Insulator Replacement - IP (Left) in Instrument Panel, Gauges and Warning Indicators.