Monte Carlo V6-3.4L VIN E (2000)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount strut bracket bolts through the engine mount strut bracket to the cylinder head.
Tighten the engine mount strut bracket bolts to 70 Nm (52 ft. lbs.).
3. Install the thermostat housing. Refer to Thermostat Replacement in Cooling System.
4. Install the engine exhaust crossover pipe. Refer to Exhaust Crossover Replacement.
5. Install the engine mount strut to the left engine mount strut bracket. Refer to Engine Mount Strut Replacement (Left) or Engine Mount Strut
Replacement (Right).
