Monte Carlo V6-3.4L VIN E (2000)
are aligned to the proper holes of the upper radiator support.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the vertical bolts (2) to the engine mount strut bracket.
Tighten the engine mount strut bracket bolts to 28 Nm (21 ft. lbs.).
3. Install the horizontal bolts (1) to the engine mount strut bracket.
Tighten the engine mount strut bracket bolt to 28 Nm (21 ft. lbs.).
4. Install the engine mount strut to the engine mount strut bracket at the upper radiator support. Refer to Engine Mount Strut Replacement (Left) or
Engine Mount Strut Replacement (Right).