Monte Carlo V6-3.4L VIN E (2000)
1. Disconnect the battery ground (negative) cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Starting and Charging.
2. Remove the right engine mount strut from the right engine mount strut bracket. Refer to Engine Mount Strut Replacement (Left) or Engine Mount
Strut Replacement (Right).
3. If equipped with oil cooler, remove the oil cooler pipe bracket bolt from the right engine mount strut bracket.
4. Reposition the air conditioning compressor. Refer to Compressor Replacement in Heating and Air Conditioning.
5. Remove the vertical bolt from the right engine mount strut bracket.
6. Remove the right engine mount strut bracket.
Installation Procedure