Monte Carlo V6-3.4L VIN E (2000)
3. Install the water pump bolts.
Tighten the water pump bolts to 10 Nm (89 inch lbs.).
4. Install the water pump pulley.
5. Tighten the water pump pulley bolts.
Tighten the water pump pulley bolts to 25 Nm (18 inch lbs.).
6. Install the drive belt. Refer to Drive Belt Replacement.
7. Install the drive belt guard.
8. Fill the cooling system. Refer to Draining and Filling Cooling System.
9. Inspect for leaks.