Monte Carlo V6-3.4L VIN E (2000)
Compressor Clutch Bearing: Service and Repair
Clutch Rotor and/or Bearing Removal (V5 - Conventional Mount)
TOOLS REQUIRED
^
J 6083 Snap Ring Pliers #24 External
^
J 9398 Rotor Bearing Remover
^
J 8092 Driver Handle
^
J 33020 Pulley Puller
^
J 33023-A Puller Pilot
1. Remove the clutch plate and hub assembly.
2. Use the J 6083 in order to remove the rotor and bearing assembly retaining ring.
3. Install the J 33023-A to the front head.