Monte Carlo V6-3.4L VIN E (2000)
Evaporator Core: Service and Repair
EVAPORATOR CORE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the HVAC module, Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/ See: Housing Assembly HVAC/Service
and Repair
2. Remove all of the outer HVAC module seals.
3. Remove the air inlet housing.
4. Unclip the heater/defrost valve vacuum actuator from the HVAC module. Remove the heater/defrost valve vacuum actuator.
5. Remove the HVAC module case upper screws.
6. Separate the HVAC module case (1).
7. Remove the HVAC module seal (2) from the lower case (1).