Monte Carlo V6-3.4L VIN E (2000)
Heater Hose: Service and Repair
Heater Pipe Replacement - Inlet
TOOLS REQUIRED
J 38185 Hose Clamp Pliers
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Engine Cooling.
2. Remove the air cleaner and duct assembly.
3. Disconnect the inlet hose (3) from the inlet pipe.
4. Use J 38185 in order to position aside the heater hose inlet clamp.
5. Remove the inlet pipe mounting nut.
6. Remove the inlet pipe.
INSTALLATION PROCEDURE