Monte Carlo V6-3.4L VIN E (2000)
Hose/Line HVAC: Service and Repair
Condenser Tube Replacement
REMOVAL PROCEDURE
1. Remove the air cleaner and duct assembly.
2. Remove the cross vehicle brace.
3. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
4. Remove the vacuum brake booster.
5. Remove the liquid line from the bracket.
6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
7. Remove the lower air deflector.
8. Disconnect the electrical connector (2) from the A/C refrigerant pressure sensor (1).
9. Remove the liquid line nut at the condenser.
10. Lower the vehicle.
11. Remove the liquid line nut at the orifice.
12. Disconnect the transmission shift cable retainer from the strut tower and position aside the transmission shift cable.