Monte Carlo V6-3.4L VIN E (2000)
Hazard Warning Switch: Service and Repair
REMOVAL PROCEDURE
1. Apply the parking brake.
2. Position the transaxle shift control indicator to 1, if equipped with column shift.
3. Adjust the steering wheel for access.
4. Remove the ignition switch cylinder bezel.
5. Remove the RH and LH instrument panel (IP) fuse block access opening covers. (Impala Only)
6. Remove the LH instrument panel (IP) fuse block access opening cover. (Monte Carlo Only)
7. Remove the steering column filler.
8. Open the instrument panel compartment door. (Monte Carlo Only)
9. Remove the IP cluster trim plate screws.
10. Start at the left side of the IP cluster trim plate. Grasp the trim plate and carefully pull rearward. Disengage the IP cluster trim plate in order to
easily access the hazard warning switch.
11. Disconnect the electrical connectors from the hazard warning switch.
12. Remove the hazard warning switch from the IP cluster trim plate.
