Monte Carlo V6-3.4L VIN E (2000)
Fuse Block: Service and Repair
Relay/Fuse Center Replacement (Right)
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the RH instrument panel (IP) fuse block access opening cover.
3. Remove the IP compartment.
4. Disconnect the body wiring harness from the junction block.
5. Remove the junction block bolt.
6. Disengage the junction block tabs from the passenger knee bolster. Pull the junction block away from the IP.
7. Disconnect the wiring harnesses from the junction block.
8. Remove the junction block.
INSTALLATION PROCEDURE