Monte Carlo V6-3.4L VIN E (2000)
1. Align the marks on the hose. Install the inlet hose to the radiator.
2. Use the J 38185 in order to reposition and install the hose clamp at the radiator.
3. Connect the inlet hose (1) to the thermostat housing.
4. Use the J 38185 in order to reposition and install the inlet hose at the thermostat housing.
5. Install the left diagonal brace. Refer to Brace Replacement - Front Fender Upper Diagonal (Impala) or Brace Replacement - Front Fender Upper
Diagonal (Monte Carlo) in Body and Frame.
6. Fill the cooling system. Refer to Draining and Filling Cooling System.
7. Inspect for leaks.
