Monte Carlo V6-3.4L VIN E (2000)
Fuse Block: Service and Repair
Relay/Fuse Center Replacement (Left)
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Adjust the instrument panel (IP) cluster trim plate for access.
3. Disconnect the body wiring harness from the junction block.
4. Remove the junction block bolts.
5. Remove the junction block tab from the slot in the cross vehicle beam. Pull the junction block away from the IP.
6. Disconnect the body wiring harness from the junction block.
7. Remove the junction block.
INSTALLATION PROCEDURE
